Product material: HIPS
Core&Cavity Steel: 2738
Steel hardness: HRC34-38
Mold Standard: DME
Cavity Number: ONE
Injection System: DIRECT GATE
Ejector System: STRIPPER PLATE, EJECTOR PIN
Cycle Time: 58S
Tooling lead time: 60 DAYS
Mold life: 1, 000, 000 SHOTS
Requirements for OEM air conditioning base mold
With the development of air conditioning part molds, more and more enterprises are joining the industry. At the same time, not only enterprises but also some friends with strong hands-on ability will try to make molds. But do you know the requirements for making molds?
1. The cost of molds should be lower
In order to reduce the mold cost, it is necessary to make rational use of materials, reduce mold cycle time, and strive to improve the mold service life.
2. To ensure mold production cycle
In mold production, it is necessary to shorten the mold production cycle. Therefore, it is necessary to shorten the forming process, expose reasonable processing standards, use economical and rational equipment, and strive to change the production of a single part. Production, adoption, and implementation of group processing technology.
3. To continuously improve the level of processing technology
According to the existing conditions, it is necessary to use new technology, new technology, and new materials to improve the production efficiency and reduce the mold cost, so that mold production has higher technical and economic benefits and levels.
4. To ensure the mold quality
The mold produced according to the technical regulations in the production and mold processing should be able to meet the requirements of all the precision and surface quality specified in the design pattern of mold and can produce qualified product parts in batches.
The above is the requirement for making molds. If you want to make molds, it is best to meet the above requirements.
Mold maintenance of air conditioning base molds
During the continuous work of the mold, mold maintenance is required due to problems such as wear of parts, deterioration of lubricant, water leakage, and plastic material crushing during movement.
The daily maintenance of the mold generally includes the following aspects:
1. Regular rust removal (appearance, PL surface, cavity, core, etc.)
2. Periodically re-lubricate (ejection mechanism, row position, etc.)
3. Periodic replacement of wearing parts (rods, bolts, etc.)
4. Other places to pay attention to
Taizhou Saiweiyue Mould & Plastic Co., Ltd.