Product dimension: 540.5*360*140.7mm
Product weight: 925 grams
Mould cavity: 1 cavity
Steel: core/cavity copper beryllium+DIN 1.2311
Gate: 4 tips hot runner point gate
Ejection system: stripper plate
Mould dimension: 890*1210*579mm
Machine: 660T injection machine
Mould running: full automaticity
Kindly see our plastic fruit crate mould. So if you want to make such kind of crate mould, how to ensure the quality?
Selecting a good mould design
In order to ensure the cooling effect of crate mould, the design of the cooling waterway must reasonable and effective. Also for the ejecting system, need to use a hydraulic core pulling system to make the crate drop automatically. We add abundant coolings to directly access the crate surface! In addition, adding copper-beryllium can be great to reduce the cycle. But for sure then the crate mould cost will be much higher.
Selecting a suitable mould steel and mould base
Such as if you want to make a large plastic crate mould with a single cavity, must use pre-hardening steel with more than 33 hardness, and also select suitable mould spare parts. In addition, must control the hardness of every piece of steel, can't to much hardness.
Selecting a good machining process
For plastic crate mould, the friction part and guide part must fine machining, there is no handwork adopted, otherwise, the plastic crate mould can't producing at high speed.
Selecting a suitable plastic raw material
Commonly, the raw material used for crate mass product is HDPE with a low melt index, such as an index of 4 or 6.
Taizhou Saiweiyue Mould & Plastic Co., Ltd.