New Plastic Basket & Dustbin Lid Samples Finished


There is a total of 7 plastic injection molds made for […]

There is a total of 7 plastic injection molds made for our Thailand customers.

Plastic basket molds are made according to the customer's original samples, the dustbin lid molds are made according to the customer's 3D printing samples.


How to order plastic injection molds from SWY MOULD?

1. Plastic mold quotation

Before a mold project start, it’s very important to know what you need, so that SWY can provide you with satisfying molds and service.

When asking for inquiries, please send us samples by express or 3D data in the format of .stp/.X_T/.prt/.igs or clear pictures with sizes and obvious features or AutoCAD drawings in the format of .dwg/.pdf or your detailed sketch with ideas.

Please also provide us following basic information: required mold steel, product plastic material, mold cavity, your plastic molding machine tonnage, injection system, product surface requirement, and size tolerance or we will give you reasonable advice according to our experience.

We will give you suggestions and reply to you with the quotation within 24hours.


2. Confirming a mold order

After getting satisfied mold price from us, some points need to be discussed and mutually agreed upon. Such as payment terms, mold requirements, mold shipment, documents needed for customs clearance, NDA (non-disclosure agreement), and other points if needed.


3. Mold design

After receiving the pre-payment, SWY MOULD will start the product and mold design. Firstly, our technical department will check the sample or drawing to analyze the feasibility of production. 
Secondly, the technical department will confirm the following points: product raw material, material shrinkage, product & mold size, product surface requirement, mold cavity, the function of the product, etc. before designing (if customers provide us with design, it’s faster). 


4. Mold machining and assembly

For every week, we will send customers the processing progress sheet with pictures or videos.

Our project manager will be in charge of all processes. 


5. Mold polishing and testing

Mold polishing is an important step in mold making, especially for some need high requirement on the mold surface. Mold polishing can increase the beauty of the plastic product, improve the piece's corrosion resistance and abrasive resistance, and be convenient to injection molding with shortening cycle time and ejecting easily. 
After all finishing, the most important step is testing. If customers can come, we are glad that they view all the testing processes by themselves. If not, we will send samples to them by express, and videos & pictures by phone.


6. Sample checking and final treatment

At the same time, we will check the mold and sample again in different aspects according to our standard and customer requirements to ensure all are ready. 


7. Mold package and shipment

* Documents preparation 

After getting the information on mold delivery, the designer department will make and check the waterway drawing and oil circuit drawing. Then copying all 2D and 3D designs, video of mold test into a CD or sending to customers' email.  

Printing the file of Mould Operation Instruction, if there is mold temperature control box, also need to print Temperature Control Box Operation Instruction. All will send to our customers also. 

* Mold package

Opening the mold and using a specific mold cleaning agent to clean all parts of mold does not allow any unclean thing on mold. Then taking photos for the record. 

Spraying the anti-rust paint on the mold cavity and core surface, especially mind the parting face. 

Closing the mold and parceling the mold with plastic vacuum film, which can prevent mold rust also it's not easy for broken. 

Putting the spare parts and documents with mold together into a wooden box. Then nailing the wooden box for delivery.

After all, is finished, the mold will be shipped by sea or subway, or airplane, which our customers decide. 


8. After-sale service 

As for the long-term relationship with our customers, after receiving the mold and starting production, we will frequently ask if the production is smooth or if need any help. Shipping mold is not the final step of one mold order, we are more concerned about mold after-sale maintenance service so that our customers can trust us and give us the next order.


Views: 157